Using the TUI

  1. Log in to the CloudControl console as htadmin.

  2. In the CloudControl TUI, enter your selection at the prompt. This can be one of the following: 

    Prompt

    Description

    1. View/Modify network settings

    Allows you to update the settings you created during CloudControl installation. See Modify your Network Settings.

    Note: You cannot change networking settings for a cluster member.

    2. Test remote server is reachable

    Allows you to ping a remote server to ensure that it can be reached. See Test your Network Connectivity.

    3. Change htadmin password

    Allows you to change your htadmin password. See Changing the htadmin Password.

    4. Enable support user

    Allows you to enable a support user that HyTrust Support can use to reach your system. See Enable or Disable the Support User.

    5. Disable support user

    Allows you to disable the support user when it is no longer necessary. See Enable or Disable the Support User.

    6. Command prompt

    Allows you to access the CloudControl CLI. See Using the CLI Command Prompt.

    7. Switch to Local Mode Authentication

    Allows you to disable your Active Directory settings and return to local authentication mode. See Switch from AD to Local Authentication Mode.

    8. View/Modify AD Settings

    Allows you to view or modify your Active Directory service account name and password. See Viewing or Modifying Active Directory Settings.

    0. Quit console

    Exits the console. See Exiting the Console.