Open topic with navigation

Removing KeyControl Nodes from a Cluster

Before you can upgrade a KeyControl node, you must remove any nodes that are in the same cluster. You can then upgrade the remaining node and use it as the basis of the new cluster.

The node that you log into with the KeyControl webGUI for this procedure will hereafter be called the "First Node", as it will become the first upgraded node in the cluster.

1. Log into the KeyControl webGUI on the first node you want to upgrade using an account with Domain Admin privileges.
2. In the top menu bar, click Cluster.
3. Click the Servers tab and select the KeyControl node that you want to remove.
4. Select Actions > Remove.
5. Click Proceed at the prompt.

6. If the KeyControl node is part of a KeyControl Mapping, select the option Do not change the mapping at the prompt.

   Because you are going to rejoin the node with the cluster, you do not have to change the KeyControl Mapping.

7. Repeat this procedure until only the current node exists in the cluster.

What to Do Next 

Upgrade the First Node as described in Upgrading the First KeyControl Node Using the webGUI or Upgrading the First KeyControl Node Using an ISO Image.

Open topic with navigation