Installing KeyControl from an OVA Template

Before You Begin 

Make sure that:

  • You know the IP address and any required network connection information, such as the domain name and the DNS and gateway IP addresses, for the machine on which you are installing KeyControl.

    Note: You must use an IPv4 address. KeyControl does not support IPv6 addresses.

  • You have the required permissions to install software on the target system.
  • The target system meets the basic system requirements described in System Requirements.

Important: Make sure that all KeyControl nodes reside on devices that are not encrypted. KeyControl has its own internal encryption, and it must be available to provide the keys for the encrypted devices before the encrypted devices can be accessed.

Procedure 

  1. Log in to your vSphere Web Client.

    Note: The following procedure uses the vSphere Web Client version 6.5. If you are using a different version of the Web Client, the procedure may vary slightly.

  2. Navigate to Hosts and Clusters.

  3. Select Actions > Deploy OVF Template.

    Note: In this context, OVF and OVA are synonymous.

  4. On the Select template page of the Deploy OVF Template wizard, browse to the location of your OVA file.
  5. Select the file and click Next.

  6. Specify the appropriate installation information in the remaining pages of the Deploy OVF Template wizard. Required fields are shown in red.

    On the Select configuration page, the configuration options use the following resources:

    Resource

    Demo or
    Proof of Concept

    Standard
    Installation

    Large
    Installation
    CPUs 2 2 4
    RAM

    4 GB

    		 8 GB 16 GB
    Disk

    60 GB

    60 GB

    140 GB

    On the Customize template page:

    • If you want to specify multiple DNS servers, enter their IP addresses as a comma-separated or space-separated list.

    • Specify a static IPv4 address in the Host IP address field. If you have an internal IP address that differs from your external IP address due to your firewall configuration, use the internal IP address. You cannot change the IP address for the node after it has been deployed.

      Note: You must use an IPv4 address. KeyControl does not support IPv6 addresses.

    • Do not use spaces or special characters in the Hostname and Domain Name fields. Only use alphanumeric characters or hyphens (-). You cannot change the hostname after the node has been deployed.

      Note: Any uppercase letters in the hostname will be translated to lowercase after the node has been deployed.

    For information about the other fields in this wizard, see your vSphere Web Client documentation.

  7. After you have finished entering the deployment information, click Next and review your choices on the Ready to complete page.

  8. Click Finish to deploy the KeyControl node.

  9. Wait until you receive a message that the installation is complete.

    You can view the installation progress in the Recent Tasks tab in the vSphere Web Client.

  10. If you selected the large installation configuration earlier in this procedure, you need to manually change the disk size alloted to the VM from the standard 60 GB to 140 GB. The OVA template sets the appropriate number of CPUs and the memory allocation but it cannot automatically change the standard disk size.
  11. Power on the KeyControl VM.

  12. Configure the node as needed. For details, see one of the following: