Configuring Default RADIUS Settings

1. Log into the KeyControl webGUI on any node in the cluster using an account with Security Admin privileges.

2. In the top menu bar, click Settings.
3. In the General Settings section, click Authentication.

4. In the Type drop-down, select RADIUS and specify the options you want to use.

   Options

   Field	Description
   Server	The RADIUS server IP address or hostname.
   Port	The port number for the RADIUS server.
   Shared Secret	The Shared Secret defined for secure communication with the RADIUS server.
   Authentication Method	Select the authentication method you want to use. KeyControl supports: PAP (Password Authentication Protocol) CHAP (Challenge Handshake Authentication Protocol) MS-CHAP (Microsoft Challenge Handshake Authentication Protocol) v1 and v2.

5. To test your RADIUS server, click Test RADIUS Server. KeyControl displays an error message if there is a problem or a confirmation message if the server is available and the Shared Secret is correct.
6. When you are finished, click Apply.