DataControl Audit Messages

There are many audit messages produced by DataControl. Many of these are informative and require no action. In the tables below, we list many of the audit messages and show:

Msg ID

Message

Severity

Alert?

Description Resolution

1

System License installed.

False

A new license has been uploaded and installed.

2

Begin System Initialization

False

3

Created group %s

False

The specified admin group has just been created.

4

Created Domain %s

False

This message appears during initialization of the first KeyControl node.

5

Added user %s to group %s

False

The user shown has been added to the specified admin group.

6

Expired password for user %s

H

False

A password has expired for the specified user. The specified user needs to log into the GUI and change his/her password.
7 User %s logged out from ipaddr %s

False

The specified user has just logged out from the IP address shown.
8 Changed following attributes for user Security Administrator :- Password, Password Expiration Date, Password History List

False

One or more of the listed attributes has been changed for the user.
9 Changed SMTP Auth Settings

False

Email settings have been modified.
10 EKS has been removed, not destroying old admin keypair

M

False

Permission to use External Key Store has been removed. The old Admin Key was NOT removed on the EKS to allow restoration of older backups. Informational only. Restore or add new access if so desired.
11 Regenerated Admin Key, Reason: %s

False

12 Created Cloud VM Set %s

False

13 Could not create Cloud VM Set %s, HTCC server connection not configured

False

14 Masterkey Recovered on node %s

True

15 User %s logged in from ipaddr %s

False

The specified user has just logged in from the IP address shown.
16 Repeated login failures for %s from ipaddr %s

H

True

There have been a succession of login failures for the specified user. A security admin should check whether the correct user has been trying to log in or not.
17 Account disabled for %s due to repeated login failures

H

True

The number of failed login attempts has reached the maximum allowed value. A security admin needs to reset the account to enable access.
18 Server registration failed -- No license Installed

True

19 Attempt to register a new %s server "%s" failed -- licensed limit reached.

H

True

The number of KeyControl servers is already at the limit imposed by the license. An attempt is being made to another another node. A new license will be required before the number of nodes in the cluster can be extended. Please contact support@hytrust.com
20 Storage Pool %s Filestore %s on server %s is low on space.

True

21 Changed following Settings :- %s

False

22 Changed following attributes for group %s :- %s

False

One or more of the listed attributes has been changed for the group shown.
23 Virtual Machine %s authenticated

False

A VM has registered or re-authenticated. This message is in response to direct admin actions. No action is required.
24 Virtual Machine %s created in group %s

False

25 Removed Server %s from Cloud %s

False

26 Created Cluster Info %s

False

27 Removed Cluster Info %s

False

28 Activated account for user %s

False

A user's account has been activated.
29 Disabled account for user %s

H

False

A user's account has been disabled. A security admin should check to see if the account should be enabled again.
30 Created user %s

False

The specified user has been created.
31 Deleted user %s

False

The specified user has been deleted.
32 Renamed user %s to %s

False

A username has been modified.
33 Deleted group %s

False

The specified groups has been deleted.
34 Renamed group %s to %s

False

An admin group has been renamed.
35 Removed user %s from group %s

False

The specified user has been removed from the group shown.
36 Using EKS for MasterKey protection

M

False

An External Key Store has been configured to protect the Admin Key.
37 Failed to use EKS for MasterKey protection

M

True

An External Key Store has been configured to protect the Admin Key but access was not allowed for keypair creation. EKS denied access to create/retrieve an RSA keypair. Please check KMIP settings and configuration.
38 Could not register to HTCC, htcc server, password and login must be specified

False

39 Could not register to HTCC %s: HTCC login failed

False

40 Could not register to HTCC %s. Please check user privileges and Boundary Control License on HTCC

False

41 Successfully registered with HTCC Server %s

False

42 Keyid %s has %s

True

Keyid has expired and/or rotated. Keys only expire if a Cloud Admin has explicitly set them to expire.
43 The Key for disk %s Virtual Machine %s has %s

True

A key for the specified VM has either expired or been rotated. Keys only expire or rotate if a Cloud Admin has explicitly set them to expire or rotate.
44 Key in VMSet %s on VMV %s has %s

True

45 Changed following KeyControl cluster settings :- %s

False

The name of the cluster has been modified.
46 Deleted Domain %s

True

47 Changed following KPS Settings :- %s

False

48 Changed following VS Appliance Settings :- %s

False

49 Unknown pool %s appeared on VMV, destroying...

True

50 Changed following Storage Pool Settings :- %s

False

51 Changed following attributes of filestore %s :- %s

False

52 Changed following settings for Cluster Info %s :- %s

False

53 Coretrace Server %s, changed following attributes :- %s

False

54 Changed following settings for Cloud VM Set %s :- %s

False

55 Cloud VM Set %s changed group ownership from %s to %s.

False

56 Deleted Cloud VM Set %s

True

57 Cloud VM Set %s: added keyid %s using %s cipher

False

A VM user has explicitly requested creation of a KeyID using the specified cipher.
58 Cloud VM Set %s: Virtual Machine %s removed keyid %s

False

A VM user has explicitly requested deletion of the specified KeyID. It has been removed from the specified Cloud VM.
59 Cloud VM Set %s: updated keyid %s

False

The KeyID description was changed.
60 Cloud VM Set %s: Virtual Machine %s attempted to fetch inactive keyid %s

M

False

The KeyID shown has been revoked but an attempt was made to fetch it. The cloud admin who owns the key should determine whether access should be reinstated or not.
61 Cloud VM Set %s: Virtual Machine %s attempted to fetch expired keyid %s

M

False

An attempt has been made to fetch an expired KeyID. The cloud admin who owns the key should determine whether access should be reinstated or not. This is only possible if the KeyID was set to 'No use?' on expiration.
62 Cloud VM Set %s: Virtual Machine %s fetched keyid %s

False

A request has been made to access the specified KeyID.
63 Revoked permission for keyid %s

M

True

KeyID is currently revoked. It must be activated before use. The cloud admin who owns the key should determine whether access should be reinstated or not.
64 Granted permission for keyid %s

True

KeyID has been activated after having been previously revoked.
65 Cloud VM Set %s keyid %s updated - description %s

False

The description field for the specified KeyID has been updated.
66 Cloud VM Set %s keyid %s updated - key expires on %s, onexpiry %s

False

The expiration date and effect on expiration for the specified KeyID have been updated.
67 Cloud VM Set %s Keyid %s has expired

M

True

An expiration date has been hit for the specified KeyID The owning cloud admin should verify that the KeyID should be no longer used.
68 Keyid %s has expired

M

True

A request to access an expired KeyID has been made. The owning cloud admin should verify that the KeyID should be no longer used.
69 The Key for keyid %s in Cloud VM Set %s expires in %d day(s). Please extend the key life.

M

True

A KeyID is about to expire. The owning cloud admin should verify that the KeyID should be expire and change the date if not.
70 Unable to check keyid %s

M

False

An error occurred while attempting to check properties of KeyID. An internal error occurred while checking expiration/rotation properties for specific keyid. Informational only, keyid will be checked again.
71 Cloud VM Set %s: added fsid %s using %s cipher

False

72 Cloud VM Set %s: Virtual Machine %s removed fsid %s

False

73 Cloud VM Set %s: Virtual Machine %s updated fsid %s

False

74 Revoked permission for fsid %s

True

75 Granted permission for fsid %s

True

76 Cloud VM Set %s fsid %s updated - key expires on %s, onexpiry %s

False

77 Cloud VM Set %s Fsid %s has expired

True

78 Properties changed for VMSet %s on server %s (%s)

False

79 Virtual Machine %s, changed following attributes: %s

False

80 Deleted Virtual Machine %s

True

81 Deleted Certificate %s

False

An unused certificate was deleted
82 The Virtual Machine %s, could not be checked for geo-location boundary. HTCC login failed

True

83 The Virtual Machine %s, is not in the geo-location boundary. Key access is denied

True

84 The Virtual Machine %s, is in the geo-location boundary. Key access is granted

True

85 Added Virtual Machine %s, authentication complete

True

A VM has completed registration. This message is in response to direct admin actions. No action is required.
86 Added Virtual Machine %s, authentication pending

True

A VM has a registration request pending. The cloud admin needs to complete authentication in the KeyControl GUI.
87 Removed Server %s from Cloud %s

False

88 Renamed Server %s to %s

False

89 Virtual Machine %s re-connected, authentication pending

H

True

A VM has a re-authorization request pending. The cloud admin needs to complete re-authorization in the KeyControl GUI.
90 Revoked permissions for Virtual Machine %s

False

91 Re-authenticated Virtual Machine %s from KPS

False

A VM has a re-authorized. This message is in response to direct admin actions. No action is required.
92 Virtual Machine %s added disk %s

False

A new disk has been added to the specified VM.
93 Virtual Machine %s removed disk %s

True

A disk has been removed from the specified VM.
94 Virtual Machine %s : disk %s renamed to %s

False

95 Virtual Machine %s attempted to fetch key for inactive disk %s. %s

False

If a disk is not active, no keys will be delivered.
96 Virtual Machine %s attempted to fetch expired key for disk %s. %s

H

False

If a key has expired an attempt by a VM to fetch the key will fail. The cloud admin should determine whether the expiration date should be extended. This does not apply to shredded keys.
97 Virtual Machine %s fetched key for disk %s. %s

False

A key for the specified disk has been requested by the VM shown.
98 Virtual Machine %s created key for disk %s using %s cipher

False

A disk has been encrypted. The type of cipher is shown.
99 Virtual Machine %s revoked permission for disk %s

True

100 Virtual Machine %s granted permission for disk %s

True

101 Virtual Machine %s added mount point %s

False

An encrypted folder has been mounted.
102 Virtual Machine %s removed fs %s

True

An encrypted folder has been removed.
103 Virtual Machine %s attempted to fetch key for inactive fsid %s

M

False

A virtual machine attempted to access an inactive FSID. The cloud admin should determine whether the FSID should be made accessible.
104 Virtual Machine %s attempted to fetch expired key for fsid %s

H

False

The FSID has expired and therefore the filesystem cannot be mounted. The cloud admin should determine whether the FSID should be made accessible. This is only possible if the FSID has not been shredded.
105 Virtual Machine %s fetched key for fsid %s

False

A filesystem was mounted using the specified FSID.
106 The Key for disk %s Virtual Machine %s has expired

H

True

An attempt is being made to change properties for an already expired key. The cloud admin should determine whether the FSID should be made accessible. This is only possible if the FSID has not been shredded.
107 Virtual Machine %s set key expiry to %s, onexpiry to %s for disk %s

H

False

An expiration date has been set on a key for the specified disk. The effect taken on expiration is shown. The cloud admin should determine whether the expiration date should be extended.
108 The Certificate for Virtual Machine %s expire%s %d days%s. Please renew the certificate.

True

109 The Key for disk %s Virtual Machine %s has expired

H

True

The key shown for the specified VM has expired. The cloud admin should determine whether the expiration date should be extended.
110 The Key for disk %s Virtual Machine %s expires in %d day(s). Please extend the key life.

H

True

The encryption key shown is about to expire. The cloud admin should determine whether the expiration date should be extended.
111 Unable to check key for disk %s Virtual Machine %s

M

False

An error occurred while attempting to check properties of key for the given disk and VM. An internal error occurred while checking expiration/rotation properties for specified key. Informational only, key will be checked again.
112 Virtual Machine %s rebooted, reauthentication required

H

True

A VM has rebooted and the reboot setting requires that the VM is re-authenticated. The cloud admin needs to complete re-authorization in the KeyControl GUI.
113 Virtual Machine %s has new alerts, please check

True

114 Added Coretrace policy "%s" to Virtual Machine %s

True

115 Activated Coretrace policy "%s" for Virtual Machine %s

False

116 De-activated Coretrace policy "%s" for Virtual Machine %s

False

117 Modified Coretrace policy "%s" for Virtual Machine %s

False

118 Removed Coretrace policy "%s" for Virtual Machine %s

False

119 Deleted CAStore %s

False

120 Removed Server %s from Domain %s

False

121 Storage pool %s created on server %s (%s)

False

122 Storage pool %s extended on server %s (%s)

False

123 Log added to Storage pool %s on server %s (%s)

False

124 Log removed from Storage pool %s on server %s (%s)

False

125 Storage pool %s deleted from server %s (%s)

False

126 Disk added to hot spare list on server %s (%s)

False

127 Disk removed from hot spare list on server %s (%s)

False

128 Filestore %s created on server %s (%s)

False

129 Filestore %s deleted from server %s (%s)

False

130 Removed server %s (%s) from domain %s

True

131 KMIP Server restarted on %s

False

The KMIP server has been restarted on the specified host.
132 KMIP Server started on %s

True

The KMIP server has been started on the specified host.
133 KMIP Server halted on %s

True

The KMIP server has been halted on the specified host.
134 KMIP Server: all users removed

True

All users have been removed from the KMIP server.
135 KMIP Server: user %s removed

True

The specified user has been removed from the KMIP server.
136 KMIP Server: user %s updated

False

The specified user has been updated on the KMIP server.
137 KMIP Server: user %s created

True

The specified user has been created on the KMIP server.
138 Could not store oskey on %s/%s. Needs recovery

H

True

Could not store object store key on joining KC node KC join did not succeed, node should be removed from cluster. If problem persists contact support.
139 Reconnect not allowed for %s/%s. Please follow reauthenication steps

H

True

KC has attempted to reauthenticate with cluster that does not recognize it KC node likely was in the cluster and removed. Should be re-joined
140 Cluster join failed for %s/%s.

H

True

KC has failed to join cluster KC node join can be attempted again. If problem persists contact support
141 Reconnect info does NOT match. Follow reauthentication steps for node %s/%s

H

True

KC has attempted to reauthenticate with cluster but its info has changed KC node likely needs MasterKey recovery or kicked out of cluster and re-joined
142 Could not store connection info for %s/%s

H

True

KC cannot store info to reconnect to cluster on restart Condition could be transitory, node could be restarted. Also could indicate that KC disk is full
143 Problem with auth/secd communication

H

True

Communication stack on KC is not working
144 System utilities NOT functioning. Authentication will not happen

H

True

Auth daemon unable to query system information
145 Attempt to add node %s/%s which has valid data but no clusterid. Please reauthenticate if this is a valid action.

M

True

KC was formerly in a cluster that has no identifying cluster ID If action is a valid one, proceed with join. Note that the KC data on joining node will be destroyed
146 Attempt to add node %s/%s which has a different clusterid. Please reauthenticate if this is a valid action.

M

True

KC was formerly in a different cluster than the one it is attempting to join If action is a valid one, proceed with join. Note that the KC data on joining node will be destroyed
147 Could not restore cluster to normal operating mode after adding new node, error $rc

M

True

KC cluster state could not be restored to normal operating state Can indicate cluster join issues
148 KeyControl Server system `hostname` ($myip) $act. L

False

149 Restricted support login enabled on `hostname`

M

True

Restricted support login was enabled on KC
150 Full support login enabled on `hostname`

M

True

Full support login was enabled on KC
151 All support logins disabled on `hostname`

M

True

All support logins were disabled on KC
152 KeyControl node {$myip[0]}/{$myhost[0]} has failed upgrade to version {$curver}

H

True

KC upgrade to new version has failed KC will revert to prior install. Upgrade can be attempted again if valid or contact support
153 KeyControl node {$myip[0]}/{$myhost[0]} reverted from {$str[1]} to {$str[2]}

M

True

User initiated revert to previous version has succeeded.
154 KeyControl node {$myip[0]}/{$myhost[0]} has successfully upgraded to version {$curver}

M

True

KC upgrade to new version has succeeded.
155 KeyControl node {$myip[0]}/{$myhost[0]} has failed upgrade finalization to version {$curver}

H

True

KC upgrade to new version has failed KC will revert to prior install. Upgrade can be attempted again if valid or contact support
156 Upgrade from version {$oldver} to version {$curver} not allowed. Consult product documentation for upgrade procedure

H

True

KC upgrade to this version is not supported from current version Upgrade to a supported version and/or contact support
157 Upgrade from version {$oldver} to version {$curver} not officially supported but allowed for development L

True

KC upgrade to this version is not officially supported but allowed for development build
158 Internal error $ret checking upgrade from {$oldver} to {$curver}

H

True

An error has occurred attempting to valid upgrade Contact support
159 Multiple KeyControl nodes still in cluster. All excess KeyControl nodes must be removed before upgrade.

H

True

Upgrade should be attempted on only a single node cluster Remove all nodes from cluster except the node to be upgraded
160 Insufficient free space to perform upgrade. Consult product documentation for procedure to add another disk

H

True

Disk does not have enough space for upgrade Consult support for freeing disk space or create/join a node with more space and upgrade that
161 System has reverted to prior installation. L

True

System has successfully reverted to prior version
162 Failed revert to prior installation.

H

True

System failed to revert to prior version Contact support. Current version is still in place
163 System utilities NOT functioning.

H

True

Unable to query system info
164 Error resizing partition

H

True

An error occurred while resizing the KeyControl storage. Please contact support.
165 Error resizing storage pool

H

True

An error occurred while resizing the KeyControl storage. Please contact support.
166 Successfully resized KeyControl storage pool

M

False

The storage pool on the KeyControl node was successfully resized.
167 KMIP Server operation failed - internal error

M

True

KMIP server operation failed with an internal error. Consult support or retry operation
168 %s operation %s for %s on %s, TaskId: %s.

False

A task has changed state
169 Virtual Machine %s : disk %s resized to %s

False

Virtual Machine disk is resized
170 Virtual Machine %s : KC mapping %s attached

False

A KC Mapping is attached to a VM
172 User %s changed %s passwd

True

An admin reset console/sysmenus passwd
173 User %s failed to change %s passwd

True

An admin attempted a reset console/sysmenus passwd that failed
174 A support event has occurred on HyTrust node %s. Please consult Support and Diagnostics section of online documentation to gather logs. Then contact HyTrust support.

H

True

Please contact HyTrust support (support@hytrust.com) for more information
175 New certificate created with guid %s in group %s L

False

A new certificate has been create for use with policy agent or KMIP server
176 Backup created successfully L

False

A new backup image has been created on the KeyControl appliance
177 Failed to create backup: %s

M

False

Creation of the backup image failed. Backup will be retried automatically or can be triggered manually via the WebGUI
178 KeyControl Cluster is in normal mode L

False

The KeyControl cluster state has returned to normal operating mode
179 KeyControl Cluster is in degraded mode

H

False

The KeyControl cluster has gone into degraded mode. This occurs when the KeyControl nodes in the cluster are not able to communicate successfully Check the availability and connectivity of the KeyControl nodes in the cluster
180 KeyControl Cluster is in standby mode L

False

The KeyControl cluster is in a standby state. This is a temporary state which occurs when a node is joining the cluster
181 Freespace available on %s has fallen below 2G. An upgrade to the storage for this system should be considered.

H

True

The amount of free disk space available to the KeyControl appliance has dropped below our recommended threshold. Please increase the size of the disk or contact support for more assistance Increase the size of the disk and reboot the KeyControl appliance to resize
182 Login failure for %s from %s L

False

User unsuccessfully attempted to login to the KeyControl instance
183 Reboot of %s initiated by %s

M

True

Domain administrator initiated reboot of KeyControl node
184 KeyControl node reboot initiated from console

M

True

The KeyControl node was rebooted from the console
185 KeyControl node shutdown initiated from console

M

True

The KeyControl node was shutdown from the console
186 Azure agent: illegal attempt to install plugin

M

True

Azure "extensions" (a.k.a. "plugins") to a KeyControl VM are not allowed
187 Azure agent: illegal attempt to disable or uninstall a plugin

M

True

Azure "extensions" (a.k.a. "plugins") to a KeyControl VM are not allowed
188 %s task for %s on %s not updated since %s, TaskId: %s L

True

A task has not been updated for a long time
189 Updated LDAP configuration: %s

M

False

The values for the given LDAP fields have been updated
190 Virtual Machine %s synchronized devices. Following devices were not found - %s. Reason for sync: %s

M

False

The Policy Agent synchronized the registered device list; some devices not found
191 Virtual Machine %s synchronized devices. Reason for sync: %s

M

False

The Policy Agent synchronized the registered device list
192 Virtual Machine %s state for disk %s changed to %s. %s L

False

Disk state on policy agent changed
193 HyTrust bootloader ssh key updated for %s L

False

Private key required for ssh login to hytrust bootloader updated on KC
194 Two-factor authentication enabled for %s L

False

Two factor authentication has been enabled for the user
195 Two-factor authentication disabled for %s

M

True

Two factor authentication has been disabled for the user
196 KeyControl Cluster is in degraded mode during node-join L

False

The KeyControl cluster has gone into degraded mode while a new node is joining the cluster. This occurs as KeyControl restarts communication protocols after a new node has joined the cluster.
197 KeyControl Cluster is in degraded mode during node-join L

False

The KeyControl cluster has gone into normal mode while a new node is joining the cluster. This occurs as KeyControl restarts communication protocols after a new node has joined the cluster.
198 New AppLink created to %s

M

True

A new Application Link has been created. This link will allow secure communication between the HyTrust products.
199 Application link removed for %s L

False

200 Sysmenus account logged in from IP

M

False

Sysmenus account login successful in one of the KeyControl nodes
201 Full support account logged in from IP

M

False

Full support account login successful in one of the KeyControl nodes
202 Sysmenus account login failure from IP - Reason

M

False

Failed attempt to login to sysmenus account
203 Full support account login failure from IP - Reason

M

False

Failed attempt to login to full support account
204 Full support account user logged in from IP and executed command

M

False

Full support account login successful and executed a command
205 Full support account login failure from IP attempting command - reason

M

False

Failed attempt to login to full support account and execute command
206 Created new log bundle - %s with options - %s L

False

New log bundle creation has been initiated by some user
207 Downloaded log bundle - %s L

False

Latest log bundle has been downloaded by some user
208 Exported Cloud VM Set %s

M

False

A Cloud VM Set has been exported
209 Imported Cloud VM Set %s

M

False

A Cloud VM Set has been imported
210 Following guests have unsupported policy agent installed in Cloud VM Set %s: %s(%s)

M

True

A Cloud VM Set has guests with unsupported agent version Upgrade policy agent on reported guests
211 Unsupported Policy Agent (version %s ) detected on guest %s.

M

False

A guests has unsupported agent version installed Upgrade policy agent on reported guest
212 Download of admin key initiated

M

False

Download of admin key initiated via admin_key GET call
213 Reset of KMIP server initiated

M

False

Reset of KMIP server initiated
214 KMIP Response/Request: op obj result

M

True

Destroy or revoke of KMIP object initiated
215 KMIP Response/Request: op obj result

M

False

Operation on some KMIP object initiated
216 The Certificate for Virtual Machine %s will auto-renew in %d days%s.

True

217 The Certificate for Virtual Machine %s failed to auto-renew. Certificate expire%s %d days%s. Please renew the certificate.

True

218 Set Key Encryption Key expiry to %s onexpiry to %s, for Cloud VM Set %s. %s Cloud VMs affected.

H

False

An expiration date has been set for Key Encryption Key for the specified Cloud VM Set. The effect taken on expiration is shown. The cloud admin should determine whether the expiration date should be extended.
219 The Key Encryption Key for Cloud VM Set %s expire%s in %d days%s.

True

The cloud admin should determine whether the expiration date should be extended.
220 The Key Encryption Key for Cloud VM Set %s has expired. %s Cloud VMs affected.

H

True

The Key Encryption Key for specified Cloud VM Set has expired. The cloud admin should determine whether the expiration date should be extended.
221 Access to Key Encryption Key of Cloud VM Set %s has been revoked. %s Cloud VMs affected.

H

True

Access to specified Cloud VM Set has been revoked.
222 Access to Key Encryption Key of Cloud VM Set %s has been granted. %s Cloud VMs affected.

H

True

Access to specified Cloud VM Set has been granted.
223 The Key Encryption Key for Cloud VM Set %s has expired. %s Cloud VMs deleted. Deleted CVM Set %s.

H

True

The Key Encryption Key for specified Cloud VM Set has expired.
224 The Certificate for Virtual Machine %s failed to auto-renew as the Virtual Machine is unreachable.

True

The Certificate Auto Renewal of a VM fails if the VM is in auto renewal period and is unreachable.
225 Authentication of Server %s (%s) failed due to incorrect passphrase

False

Authentication of KeyControl node failed due to incorrect passphrase.
226 Cloud VM Set creation failed. Error: Failed to store key in HSM. %s

H

True

Cloud VM Set creation failed. Failed to store key in HSM. A security admin should check whether the HSM connection is configured properly
227 Key Encryption Key import failed. Error: Failed to store key in HSM. %s

H

True

Key Encryption Key import failed. Failed to store key in HSM. A security admin should check whether the HSM connection is configured properly
228 Failed to fetch Key Encryption Key from HSM. Error: %s

H

True

Failed to fetch Key Encryption Key from HSM. A security admin should check whether the HSM connection is configured properly
229 Successfully imported Key Encryption Key for Cloud VM Set %s.

False

Successfully imported Key Encryption Key
230 Removed Domain %s from group %s

False

Removed Domain from group
231 Authenticated Server %s (%s)

False

New Key Control has been successfully authenticated and added to the cluster
232 Added Server %s (%s) to Domain %s

False

Server has been successfully added to a domain
233 Invalid Key Encryption Key size specified for Cloud VM Set %s.

H

True

Invalid Key Encryption Key size Verify that the Key Encryption Key size is 128 bits or 256 bits
234 Retention period has expired for Cloud VM Set %s. %s Cloud VMs deleted. Deleted Cloud VM Set %s.

True

Retention period has expired for Cloud VM Set
235 Retention period for Cloud VM Set %s will expire in %d days.

True

Retention period expiration for Cloud VM Set The cloud admin should determine whether the retention date should be extended.
236 Set Retention Date to %s for Cloud VM Set %s.

False

Changed Retention period for Cloud VM Set
237 Failed to delete Key Encryption Key from HSM for Cloud VM Set %s. Error: %s.

True

Failed to delete Key Encryption Key from HSM
238 New CA Certificate added to Certificate Store for verifying %s

False

New CA certficate has been added to verify some subsystem
239 CA Certificate for %s removed from Certificate Store

False

CA Certificate for some subsystem has been removed from Certificate Store
240 Authentication for LDAP user %s failed. Reason :- %s

False

Reason for LDAP login failures
241 Cannot register Cloud VM until Key Encryption Key for Cloud VM Set %s is imported

True

Cannot register Cloud VM
242 Virtual Machine %s HTcrypt driver changed L

False

HTcrypt driver state on policy agent changed
243 New self-signed certificates generated for %s L

False

New self-signed certificates generated for server
244 New SSL certificate installed for %s L

False

New SSL certificate installed for server
245 CSR generated with common name - %s L

False

New CSR generated
246 Web server for %s restarted L

False

Webserver/Apache restarted for server
247 Certificate installation task got timed out. There are VMs that did not receive the new CA certificate. Please contact Cloud Administrators to login to the VM and execute hcl heartbeat before restarting the webserver

H

True

One (or more) policy agents did not receive the new CA certificate uploaded. Cloud administrator has to login to the policy agent and execute hcl heartbeat
248 Cannot update CA as part of SSL certificate installation for %s. Please login to the VM and execute hcl heartbeat

H

True

Domain Administrator has attempted to install a new SSL certificate for the webserver. Unfortunately one of the policy agents did not receive a copy of the new CA certificate that can verify the SSL certificate of the webserver. Cloud administrator has to login to the policy agent and execute hcl heartbeat