Configuring Multi-Factor Authentication using Radius

  1. From the Home tab, select System > Multi-Factor Authentication.

  2. On the Multi-Factor Authentication page, click the Configuration tab.

  3. In the Authentication Type field, select Radius and complete the following: 

    Field

    Value

    Server IP/FQDN Address

    The RADIUS server IP address or FQDN.

    Port

    The port number for the RADIUS server.
    Secret Message

    The secret message defined for secure communication with the RADIUS server.

    Authentication Mode

    Select the authentication method you want to use. CloudControl supports:

    • PAP (Password Authentication Protocol)
    • CHAP (Challenge Handshake Authentication Protocol)
  4. Click Enable.